diff options
59 files changed, 4104 insertions, 11 deletions
diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 00000000..87bacf7e --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,331 @@ +cmake_minimum_required(VERSION 3.10) +project(monero-gui) + +message(STATUS "Initiating compile using CMake ${CMAKE_VERSION}") + +set(VERSION_MAJOR "14") +set(VERSION_MINOR "0") +set(VERSION_REVISION "3") +set(VERSION "${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_REVISION}") + +# libwallet requires a static build, so we only allow static compilation +set(STATIC ON) + +option(USE_DEVICE_TREZOR ON) +option(ENABLE_PASS_STRENGTH_METER "Disable zxcvbn" OFF) +option(WITH_SCANNER "Enable webcam QR scanner" OFF) +option(DEV_MODE "Checkout latest monero master on build" OFF) + +list(INSERT CMAKE_MODULE_PATH 0 "${CMAKE_SOURCE_DIR}/cmake") +set(CMAKE_AUTOMOC ON) +set(CMAKE_AUTORCC ON) +set(CMAKE_AUTOUIC ON) +if(DEBUG) + set(CMAKE_VERBOSE_MAKEFILE ON) +endif() + +set(BUILD_GUI_DEPS ON) +set(ARCH "x86-64") +set(BUILD_64 ON) +set(INSTALL_VENDORED_LIBUNBOUND=ON) + +find_package(Git) +if(GIT_FOUND) + if(NOT DEV_MODE) + find_package(Git) + function (check_submodule relative_path) + execute_process(COMMAND git rev-parse "HEAD" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${relative_path} OUTPUT_VARIABLE localHead) + execute_process(COMMAND git rev-parse "HEAD:${relative_path}" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} OUTPUT_VARIABLE checkedHead) + string(COMPARE EQUAL "${localHead}" "${checkedHead}" upToDate) + if (upToDate) + message(STATUS "Submodule '${relative_path}' is up-to-date") + else() + message(FATAL_ERROR "Submodule '${relative_path}' is not using the checked head. Please update all submodules with\ngit submodule update --init --force\nor run cmake with -DMANUAL_SUBMODULES=1,\n or if you want to build from latest master run cmake with -DEV_MODE,\n or run make devmode") + endif() + endfunction () + message(STATUS "Checking submodules") + check_submodule(monero) + else() + execute_process(COMMAND cd monero && git checkout origin/master) + endif() +endif() + +add_subdirectory(monero) +set_property(TARGET wallet_merged PROPERTY FOLDER "monero") +get_directory_property(ARCH_WIDTH DIRECTORY "monero" DEFINITION ARCH_WIDTH) + +if(STATIC) + message(STATUS "Initiating static build") + set(Boost_USE_STATIC_LIBS ON) + set(CMAKE_FIND_LIBRARY_SUFFIXES ".a") +endif() + +# Include password strength library +if(ENABLE_PASS_STRENGTH_METER) + message(STATUS "Buildin with pass strength meter support.") +else() + add_definitions(-DDISABLE_PASS_STRENGTH_METER) +endif() + +include(CheckTrezor) # Trezor support check +include(CMakePackageConfigHelpers) + +# force version update +function (monero_gui_add_library_with_deps) + cmake_parse_arguments(MONERO_ADD_LIBRARY "" "NAME" "DEPENDS;SOURCES" ${ARGN}) + source_group("${MONERO_ADD_LIBRARY_NAME}" FILES ${MONERO_ADD_LIBRARY_SOURCES}) + + # Define a ("virtual") object library and an actual library that links those + # objects together. The virtual libraries can be arbitrarily combined to link + # any subset of objects into one library archive. This is used for releasing + # libwallet, which combines multiple components. + set(objlib obj_${MONERO_ADD_LIBRARY_NAME}) + add_library(${objlib} OBJECT ${MONERO_ADD_LIBRARY_SOURCES}) + add_library("${MONERO_ADD_LIBRARY_NAME}" $<TARGET_OBJECTS:${objlib}>) + if (MONERO_ADD_LIBRARY_DEPENDS) + add_dependencies(${objlib} ${MONERO_ADD_LIBRARY_DEPENDS}) + endif() + set_property(TARGET "${MONERO_ADD_LIBRARY_NAME}" PROPERTY FOLDER "libs") + target_compile_definitions(${objlib} + PRIVATE $<TARGET_PROPERTY:${MONERO_ADD_LIBRARY_NAME},INTERFACE_COMPILE_DEFINITIONS>) +endfunction () + +function (monero_gui_add_library name) + monero_gui_add_library_with_deps(NAME "${name}" SOURCES ${ARGN}) +endfunction() + +include_directories(${EASYLOGGING_INCLUDE}) +link_directories(${EASYLOGGING_LIBRARY_DIRS}) + + +include(VersionGui) +monero_gui_add_library(gui_version SOURCES version.js DEPENDS genversiongui) + +message(STATUS "${CMAKE_MODULE_PATH}") + +find_package(X11 REQUIRED) + +# OpenSSL +find_package(OpenSSL REQUIRED) +message(STATUS "OpenSSL: Version ${OPENSSL_VERSION}") +message(STATUS "OpenSSL: include dir at ${OPENSSL_INCLUDE_DIR}") +message(STATUS "OpenSSL: libraries at ${OPENSSL_LIBRARIES} ${OPENSSL_SSL_LIBRARIES}") + +# Zbar (for QR scanner) +if(WITH_SCANNER) + add_definitions(-DWITH_SCANNER) + find_package(ZBar0) + message(STATUS "libzbar: include dir at ${ZBAR_INCLUDE_DIR}") + message(STATUS "libzbar: libraries at ${ZBAR_LIBRARIES}") +endif() + +# Sodium +find_library(SODIUM_LIBRARY sodium) +message(STATUS "libsodium: libraries at ${SODIUM_LIBRARY}") + +# LibUSB +find_package(LibUSB) +message(STATUS "libusb: include dir at ${LibUSB_INCLUDE_DIRS}") +message(STATUS "libusb: libraries at ${LibUSB_LIBRARIES}") + +# HIDApi +find_package(HIDAPI REQUIRED) +message(STATUS "libhidapi: include dir at ${HIDAPI_INCLUDE_DIRS}") +message(STATUS "libhidapi: libraries at ${HIDAPI_LIBRARIES}") + +# Boost +if(DEBUG) + set(Boost_DEBUG ON) +endif() +find_package(Boost 1.62 REQUIRED COMPONENTS + system + filesystem + thread + date_time + chrono + regex + serialization + program_options + locale) + +if(LINUX) + find_package(X11 REQUIRED) + message(STATUS "X11_FOUND = ${X11_FOUND}") + message(STATUS "X11_INCLUDE_DIR = ${X11_INCLUDE_DIR}") + message(STATUS "X11_LIBRARIES = ${X11_LIBRARIES}") + include_directories(${X11_INCLUDE_DIR}) + link_directories(${X11_LIBRARIES}) + if(STATIC) + find_library(XCB_LIBRARY xcb) + message(STATUS "Found xcb library: ${XCB_LIBRARY}") + endif() +endif() + +if(MINGW) + string(REGEX MATCH "^[^/]:/[^/]*" msys2_install_path "${CMAKE_C_COMPILER}") + message(STATUS "MSYS location: ${msys2_install_path}") + set(CMAKE_INCLUDE_PATH "${msys2_install_path}/mingw${ARCH_WIDTH}/include") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/Qt/labs/folderlistmodel") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/Qt/labs/settings") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtGraphicalEffects") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtGraphicalEffects/private") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtMultimedia") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick.2") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Controls") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Controls.2") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Dialogs") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Dialogs/Private") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Layouts") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/PrivateWidgets") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Templates.2") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/Window.2") + link_directories("${msys2_install_path}/mingw${ARCH_WIDTH}/qml/QtQuick/XmlListModel") + # This is necessary because otherwise CMake will make Boost libraries -lfoo + # rather than a full path. Unfortunately, this makes the shared libraries get + # linked due to a bug in CMake which misses putting -static flags around the + # -lfoo arguments. + set(DEFLIB ${msys2_install_path}/mingw${ARCH_WIDTH}/lib) + list(REMOVE_ITEM CMAKE_C_IMPLICIT_LINK_DIRECTORIES ${DEFLIB}) + list(REMOVE_ITEM CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES ${DEFLIB}) +endif() + +set(QT5_LIBRARIES + Qt5Core + Qt5Quick + Qt5QuickControls2 + Qt5Widgets + Qt5Gui + Qt5Network + Qt5Qml + Qt5Multimedia + Qt5Xml + Qt5XmlPatterns + Qt5Svg +) + +foreach(QT5_MODULE ${QT5_LIBRARIES}) + find_package(${QT5_MODULE} REQUIRED) +endforeach() + +find_package(PkgConfig) +if(PKGCONFIG_FOUND) + pkg_check_modules(QT5_PKG_CONFIG ${QT5_LIBRARIES}) + + if(QT5_PKG_CONFIG_FOUND) + set(QT5_PKG_CONFIG "QT5_PKG_CONFIG") + if(STATIC) + set(QT5_PKG_CONFIG "${QT5_PKG_CONFIG}_STATIC") + endif() + + set(QT5_LIBRARIES ${${QT5_PKG_CONFIG}_LIBRARIES} ${${QT5_PKG_CONFIG}_LDFLAGS_OTHER}) + include_directories(${${QT5_PKG_CONFIG}_INCLUDE_DIRS}) + link_directories(${${QT5_PKG_CONFIG}_LIBRARY_DIRS}) + endif() +endif() + +list(APPEND QT5_LIBRARIES + ${Qt5Gui_PLUGINS} + ${Qt5Svg_PLUGINS} + ${Qt5Qml_PLUGINS} + ${Qt5Network_PLUGINS} +) + +if(STATIC) + set(QT5_LIBRARIES + qtquickcontrols2plugin # has to be the first one, depends on Qt5QuickControls2 + ${QT5_LIBRARIES} + declarative_multimedia + dialogplugin + dialogsprivateplugin + qmlfolderlistmodelplugin + qmlsettingsplugin + qmlxmllistmodelplugin + qquicklayoutsplugin + Qt5EventDispatcherSupport + Qt5FontDatabaseSupport + Qt5MultimediaQuick_p + Qt5PacketProtocol + Qt5ThemeSupport + qtgraphicaleffectsplugin + qtgraphicaleffectsprivate + qtquick2plugin + qtquickcontrolsplugin + qtquicktemplates2plugin + widgetsplugin + windowplugin + ) + + if(MINGW) + list(APPEND QT5_LIBRARIES freetype) + + if(CMAKE_BUILD_TYPE STREQUAL "Debug") + list(APPEND QT5_LIBRARIES D3D11 Dwrite D2d1) + endif() + endif() +endif() + +message(STATUS "Using Boost include dir at ${Boost_INCLUDE_DIRS}") +message(STATUS "Using Boost libraries at ${Boost_LIBRARIES}") + +include_directories(SYSTEM ${Boost_INCLUDE_DIRS}) +if(MINGW) + set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -Wa,-mbig-obj") + set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi;crypt32;bcrypt) + if(DEPENDS) + set(ICU_LIBRARIES icuio icui18n icuuc icudata icutu iconv) + else() + set(ICU_LIBRARIES icuio icuin icuuc icudt icutu iconv) + endif() +elseif(APPLE OR OPENBSD OR ANDROID) + set(EXTRA_LIBRARIES "") +elseif(FREEBSD) + set(EXTRA_LIBRARIES execinfo) +elseif(DRAGONFLY) + find_library(COMPAT compat) + set(EXTRA_LIBRARIES execinfo ${COMPAT}) +elseif(CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)") + set(EXTRA_LIBRARIES socket nsl resolv) +elseif(NOT MSVC AND NOT DEPENDS) + find_library(RT rt) + set(EXTRA_LIBRARIES ${RT}) +endif() + +list(APPEND EXTRA_LIBRARIES ${CMAKE_DL_LIBS}) + +if(APPLE) + include_directories(SYSTEM /usr/include/malloc) + if(POLICY CMP0042) + cmake_policy(SET CMP0042 NEW) + endif() +endif() + +if (APPLE AND NOT IOS) + set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -march=x86-64 -fvisibility=default -std=c++11") +endif() + +if(APPLE) + set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fvisibility=default -DGTEST_HAS_TR1_TUPLE=0") +endif() + + +if (HIDAPI_FOUND OR LibUSB_COMPILE_TEST_PASSED) + if (APPLE) + if(DEPENDS) + list(APPEND EXTRA_LIBRARIES "-framework Foundation -framework IOKit") + else() + find_library(COREFOUNDATION CoreFoundation) + find_library(IOKIT IOKit) + list(APPEND EXTRA_LIBRARIES ${IOKIT}) + list(APPEND EXTRA_LIBRARIES ${COREFOUNDATION}) + endif() + endif() + if (WIN32) + list(APPEND EXTRA_LIBRARIES setupapi Version) + endif() +endif() + +add_subdirectory(src) + +# Required to make wallet_merged build before the gui +add_dependencies(monero-gui wallet_merged) + diff --git a/Makefile b/Makefile new file mode 100644 index 00000000..e5f3ab05 --- /dev/null +++ b/Makefile @@ -0,0 +1,40 @@ +ANDROID_STANDALONE_TOOLCHAIN_PATH ?= /usr/local/toolchain + +dotgit=$(shell ls -d .git/config) +ifneq ($(dotgit), .git/config) + USE_SINGLE_BUILDDIR=1 +endif + +subbuilddir:=$(shell echo `uname | sed -e 's|[:/\\ \(\)]|_|g'`/`git branch | grep '\* ' | cut -f2- -d' '| sed -e 's|[:/\\ \(\)]|_|g'`) +ifeq ($(USE_SINGLE_BUILDDIR),) + builddir := build/"$(subbuilddir)" + topdir := ../../../.. + deldirs := $(builddir) +else + builddir := build + topdir := ../.. + deldirs := $(builddir)/debug $(builddir)/release $(builddir)/fuzz +endif + + +default: + mkdir -p build && cd build && cmake -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release .. && $(MAKE) +debug: + mkdir -p build && cd build && ccmake .. && $(MAKE) VERBOSE=1 +devmode: + mkdir -p build && cd build && cmake -D ARCH="x86-64" -D DEV_MODE=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release .. && $(MAKE) +clean: + mkdir -p build && cd build && rm -rf * +scanner: + mkdir -p build && cd build && cmake -D ARCH="x86-64" -D DEV_MODE=ON -D WITH_SCANNER=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release .. && $(MAKE) + +debug-static-win64: + mkdir -p $(builddir)/debug && cd $(builddir)/debug && cmake -D STATIC=ON -G "MSYS Makefiles" -D DEV_MODE=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys64 -D MINGW=ON $(topdir) && $(MAKE) + +debug-static-mac64: + mkdir -p $(builddir)/debug + cd $(builddir)/debug && cmake -D STATIC=ON -D DEV_MODE=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="mac-x64" $(topdir) && $(MAKE) + +release-static-win64: + mkdir -p $(builddir)/release && cd $(builddir)/release && cmake -D STATIC=ON -G "MSYS Makefiles" -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys64 -D MINGW=ON $(topdir) && $(MAKE) + diff --git a/cmake/32-bit-toolchain.cmake b/cmake/32-bit-toolchain.cmake new file mode 100644 index 00000000..2d53adf0 --- /dev/null +++ b/cmake/32-bit-toolchain.cmake @@ -0,0 +1,50 @@ +# Copyright (c) 2014-2019, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +if (NOT CMAKE_HOST_WIN32) + set (CMAKE_SYSTEM_NAME Windows) +endif() + +set (GCC_PREFIX i686-w64-mingw32) +set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc) +set (CMAKE_CXX_COMPILER ${GCC_PREFIX}-g++) +set (CMAKE_AR ar CACHE FILEPATH "" FORCE) +set (CMAKE_NM nm CACHE FILEPATH "" FORCE) +set (CMAKE_LINKER ld CACHE FILEPATH "" FORCE) +#set (CMAKE_RANLIB ${GCC_PREFIX}-gcc-ranlib CACHE FILEPATH "" FORCE) +set (CMAKE_RC_COMPILER windres) + +set (CMAKE_FIND_ROOT_PATH "${MSYS2_FOLDER}/mingw32") + +# Ensure cmake doesn't find things in the wrong places +set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) # Find programs on host +set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) # Find libs in target +set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) # Find includes in target + +set (MINGW_FLAG "-m32") +set (USE_LTO_DEFAULT false) diff --git a/cmake/64-bit-toolchain.cmake b/cmake/64-bit-toolchain.cmake new file mode 100644 index 00000000..7c56eef9 --- /dev/null +++ b/cmake/64-bit-toolchain.cmake @@ -0,0 +1,50 @@ +# Copyright (c) 2014-2019, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +if (NOT CMAKE_HOST_WIN32) + set (CMAKE_SYSTEM_NAME Windows) +endif() + +set (GCC_PREFIX x86_64-w64-mingw32) +set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc) +set (CMAKE_CXX_COMPILER ${GCC_PREFIX}-g++) +set (CMAKE_AR ar CACHE FILEPATH "" FORCE) +set (CMAKE_NM nm CACHE FILEPATH "" FORCE) +set (CMAKE_LINKER ld CACHE FILEPATH "" FORCE) +#set (CMAKE_RANLIB ${GCC_PREFIX}-gcc-ranlib CACHE FILEPATH "" FORCE) +set (CMAKE_RC_COMPILER windres) + +set (CMAKE_FIND_ROOT_PATH "${MSYS2_FOLDER}/mingw64") + +# Ensure cmake doesn't find things in the wrong places +set (CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) # Find programs on host +set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) # Find libs in target +set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) # Find includes in target + +set (MINGW_FLAG "-m64") +set (USE_LTO_DEFAULT false) diff --git a/cmake/CheckLinkerFlag.c b/cmake/CheckLinkerFlag.c new file mode 100644 index 00000000..a0dcc168 --- /dev/null +++ b/cmake/CheckLinkerFlag.c @@ -0,0 +1,14 @@ +#ifdef __CLASSIC_C__ +int main() +{ + int ac; + char* av[]; +#else +int main(int ac, char* av[]) +{ +#endif + if (ac > 1000) { + return *av[0]; + } + return 0; +} diff --git a/cmake/CheckLinkerFlag.cmake b/cmake/CheckLinkerFlag.cmake new file mode 100644 index 00000000..2b507ab7 --- /dev/null +++ b/cmake/CheckLinkerFlag.cmake @@ -0,0 +1,47 @@ +include(CheckCCompilerFlag) + +macro(CHECK_LINKER_FLAG flag VARIABLE) + if(NOT DEFINED "${VARIABLE}") + if(NOT CMAKE_REQUIRED_QUIET) + message(STATUS "Looking for ${flag} linker flag") + endif() + + set(_cle_source ${CMAKE_SOURCE_DIR}/cmake/CheckLinkerFlag.c) + + set(saved_CMAKE_C_FLAGS ${CMAKE_C_FLAGS}) + set(CMAKE_C_FLAGS "${flag}") + try_compile(${VARIABLE} + ${CMAKE_BINARY_DIR} + ${_cle_source} + COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} ${flag} + CMAKE_FLAGS + OUTPUT_VARIABLE OUTPUT) + unset(_cle_source) + set(CMAKE_C_FLAGS ${saved_CMAKE_C_FLAGS}) + unset(saved_CMAKE_C_FLAGS) + + if ("${OUTPUT}" MATCHES "warning.*ignored") + set(${VARIABLE} 0) + endif() + + if(${VARIABLE}) + if(NOT CMAKE_REQUIRED_QUIET) + message(STATUS "Looking for ${flag} linker flag - found") + endif() + set(${VARIABLE} 1 CACHE INTERNAL "Have linker flag ${flag}") + file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + "Determining if the ${flag} linker flag is supported " + "passed with the following output:\n" + "${OUTPUT}\n\n") + else() + if(NOT CMAKE_REQUIRED_QUIET) + message(STATUS "Looking for ${flag} linker flag - not found") + endif() + set(${VARIABLE} "" CACHE INTERNAL "Have linker flag ${flag}") + file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + "Determining if the ${flag} linker flag is supported " + "failed with the following output:\n" + "${OUTPUT}\n\n") + endif() + endif() +endmacro() diff --git a/cmake/CheckTrezor.cmake b/cmake/CheckTrezor.cmake new file mode 100644 index 00000000..cc7226bc --- /dev/null +++ b/cmake/CheckTrezor.cmake @@ -0,0 +1,181 @@ +OPTION(USE_DEVICE_TREZOR "Trezor support compilation" ON) +OPTION(USE_DEVICE_TREZOR_LIBUSB "Trezor LibUSB compilation" ON) +OPTION(USE_DEVICE_TREZOR_UDP_RELEASE "Trezor UdpTransport in release mode" OFF) +OPTION(USE_DEVICE_TREZOR_DEBUG "Trezor Debugging enabled" OFF) +OPTION(TREZOR_DEBUG "Main trezor debugging switch" OFF) + +# Helper function to fix cmake < 3.6.0 FindProtobuf variables +function(_trezor_protobuf_fix_vars) + if(${CMAKE_VERSION} VERSION_LESS "3.6.0") + foreach(UPPER + PROTOBUF_SRC_ROOT_FOLDER + PROTOBUF_IMPORT_DIRS + PROTOBUF_DEBUG + PROTOBUF_LIBRARY + PROTOBUF_PROTOC_LIBRARY + PROTOBUF_INCLUDE_DIR + PROTOBUF_PROTOC_EXECUTABLE + PROTOBUF_LIBRARY_DEBUG + PROTOBUF_PROTOC_LIBRARY_DEBUG + PROTOBUF_LITE_LIBRARY + PROTOBUF_LITE_LIBRARY_DEBUG + ) + if (DEFINED ${UPPER}) + string(REPLACE "PROTOBUF_" "Protobuf_" Camel ${UPPER}) + if (NOT DEFINED ${Camel}) + set(${Camel} ${${UPPER}} PARENT_SCOPE) + endif() + endif() + endforeach() + endif() +endfunction() + +# Use Trezor master switch +if (USE_DEVICE_TREZOR) + # Protobuf is required to build protobuf messages for Trezor + include(FindProtobuf OPTIONAL) + find_package(Protobuf) + _trezor_protobuf_fix_vars() + + # Protobuf handling the cache variables set in docker. + if(NOT Protobuf_FOUND AND NOT Protobuf_LIBRARY AND NOT Protobuf_PROTOC_EXECUTABLE AND NOT Protobuf_INCLUDE_DIR) + message(STATUS "Could not find Protobuf") + elseif(NOT Protobuf_LIBRARY OR NOT EXISTS "${Protobuf_LIBRARY}") + message(STATUS "Protobuf library not found: ${Protobuf_LIBRARY}") + unset(Protobuf_FOUND) + elseif(NOT Protobuf_PROTOC_EXECUTABLE OR NOT EXISTS "${Protobuf_PROTOC_EXECUTABLE}") + message(STATUS "Protobuf executable not found: ${Protobuf_PROTOC_EXECUTABLE}") + unset(Protobuf_FOUND) + elseif(NOT Protobuf_INCLUDE_DIR OR NOT EXISTS "${Protobuf_INCLUDE_DIR}") + message(STATUS "Protobuf include dir not found: ${Protobuf_INCLUDE_DIR}") + unset(Protobuf_FOUND) + else() + message(STATUS "Protobuf lib: ${Protobuf_LIBRARY}, inc: ${Protobuf_INCLUDE_DIR}, protoc: ${Protobuf_PROTOC_EXECUTABLE}") + set(Protobuf_INCLUDE_DIRS ${Protobuf_INCLUDE_DIR}) + set(Protobuf_FOUND 1) # override found if all rquired info was provided by variables + endif() + + if(TREZOR_DEBUG) + set(USE_DEVICE_TREZOR_DEBUG 1) + endif() + + # Compile debugging support (for tests) + if (USE_DEVICE_TREZOR_DEBUG) + add_definitions(-DWITH_TREZOR_DEBUGGING=1) + endif() +else() + message(STATUS "Trezor support disabled by USE_DEVICE_TREZOR") +endif() + +if(Protobuf_FOUND AND USE_DEVICE_TREZOR) + if (NOT "$ENV{TREZOR_PYTHON}" STREQUAL "") + set(TREZOR_PYTHON "$ENV{TREZOR_PYTHON}" CACHE INTERNAL "Copied from environment variable TREZOR_PYTHON") + else() + find_package(Python QUIET COMPONENTS Interpreter) # cmake 3.12+ + if(Python_Interpreter_FOUND) + set(TREZOR_PYTHON "${Python_EXECUTABLE}") + endif() + endif() + + if(NOT TREZOR_PYTHON) + find_package(PythonInterp) + if(PYTHONINTERP_FOUND AND PYTHON_EXECUTABLE) + set(TREZOR_PYTHON "${PYTHON_EXECUTABLE}") + endif() + endif() + + if(NOT TREZOR_PYTHON) + message(STATUS "Trezor: Python not found") + endif() +endif() + +# Protobuf compilation test +if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON) + execute_process(COMMAND ${Protobuf_PROTOC_EXECUTABLE} -I "${CMAKE_SOURCE_DIR}/cmake" -I "${Protobuf_INCLUDE_DIR}" "${CMAKE_SOURCE_DIR}/cmake/test-protobuf.proto" --cpp_out ${CMAKE_BINARY_DIR} RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR) + if(RET) + message(STATUS "Protobuf test generation failed: ${OUT} ${ERR}") + endif() + + try_compile(Protobuf_COMPILE_TEST_PASSED + "${CMAKE_BINARY_DIR}" + SOURCES + "${CMAKE_BINARY_DIR}/test-protobuf.pb.cc" + "${CMAKE_SOURCE_DIR}/cmake/test-protobuf.cpp" + CMAKE_FLAGS + "-DINCLUDE_DIRECTORIES=${Protobuf_INCLUDE_DIR};${CMAKE_BINARY_DIR}" + "-DCMAKE_CXX_STANDARD=11" + LINK_LIBRARIES ${Protobuf_LIBRARY} + OUTPUT_VARIABLE OUTPUT + ) + if(NOT Protobuf_COMPILE_TEST_PASSED) + message(STATUS "Protobuf Compilation test failed: ${OUTPUT}.") + endif() +endif() + +# Try to build protobuf messages +if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON AND Protobuf_COMPILE_TEST_PASSED) + set(ENV{PROTOBUF_INCLUDE_DIRS} "${Protobuf_INCLUDE_DIR}") + set(ENV{PROTOBUF_PROTOC_EXECUTABLE} "${Protobuf_PROTOC_EXECUTABLE}") + set(TREZOR_PROTOBUF_PARAMS "") + if (USE_DEVICE_TREZOR_DEBUG) + set(TREZOR_PROTOBUF_PARAMS "--debug") + endif() + + execute_process(COMMAND ${TREZOR_PYTHON} tools/build_protob.py ${TREZOR_PROTOBUF_PARAMS} WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}/monero/src/device_trezor/trezor RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR) + if(RET) + message(WARNING "Trezor protobuf messages could not be regenerated (err=${RET}, python ${PYTHON})." + "OUT: ${OUT}, ERR: ${ERR}." + "Please read src/device_trezor/trezor/tools/README.md") + else() + message(STATUS "Trezor protobuf messages regenerated out: \"${OUT}.\"") + set(DEVICE_TREZOR_READY 1) + add_definitions(-DDEVICE_TREZOR_READY=1) + add_definitions(-DPROTOBUF_INLINE_NOT_IN_HEADERS=0) + + if(CMAKE_BUILD_TYPE STREQUAL "Debug") + add_definitions(-DTREZOR_DEBUG=1) + endif() + + if(USE_DEVICE_TREZOR_UDP_RELEASE) + add_definitions(-DUSE_DEVICE_TREZOR_UDP_RELEASE=1) + endif() + + if (Protobuf_INCLUDE_DIR) + include_directories(${Protobuf_INCLUDE_DIR}) + endif() + + # LibUSB support, check for particular version + # Include support only if compilation test passes + if (USE_DEVICE_TREZOR_LIBUSB) + find_package(LibUSB) + endif() + + if (LibUSB_COMPILE_TEST_PASSED) + add_definitions(-DHAVE_TREZOR_LIBUSB=1) + if(LibUSB_INCLUDE_DIRS) + include_directories(${LibUSB_INCLUDE_DIRS}) + endif() + endif() + + set(TREZOR_LIBUSB_LIBRARIES "") + if(LibUSB_COMPILE_TEST_PASSED) + list(APPEND TREZOR_LIBUSB_LIBRARIES ${LibUSB_LIBRARIES}) + message(STATUS "Trezor compatible LibUSB found at: ${LibUSB_INCLUDE_DIRS}") + endif() + + if (BUILD_GUI_DEPS) + set(TREZOR_DEP_LIBS "") + set(TREZOR_DEP_LINKER "") + + if (Protobuf_LIBRARY) + list(APPEND TREZOR_DEP_LIBS ${Protobuf_LIBRARY}) + string(APPEND TREZOR_DEP_LINKER " -lprotobuf") + endif() + + if (TREZOR_LIBUSB_LIBRARIES) + list(APPEND TREZOR_DEP_LIBS ${TREZOR_LIBUSB_LIBRARIES}) + string(APPEND TREZOR_DEP_LINKER " -lusb-1.0") + endif() + endif() + endif() +endif() diff --git a/cmake/Doxyfile.in b/cmake/Doxyfile.in new file mode 100644 index 00000000..35a4911f --- /dev/null +++ b/cmake/Doxyfile.in @@ -0,0 +1,1803 @@ +# Doxyfile 1.8.1.2 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = Monero + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION_STRING@ + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = @CPACK_PACKAGE_DESCRIPTION_SUMMARY@ + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./docs + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = YES + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = YES + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +SYMBOL_CACHE_SIZE = 0 + +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ../README.md \ + ../contrib/ \ + ../external/ \ + ../include/ \ + ../tests/ \ + ../src/ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = *.cpp \ + *.h \ + *.hpp + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = *.pb.* \ + tinythread.* \ + fast_mutex.* \ + anyoption.* \ + stacktrace.* \ + */simpleini/* \ + ExportWrapper.* \ + WinsockWrapper.* \ + otapicli.* \ + test*.* \ + irrXML.* \ + */chaiscript/* \ + */zmq/* + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = tinythread + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = YES + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C, C++ and Fortran comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# style sheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> +# Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> +# Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = YES + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you may also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = OT_CRYPTO_USING_OPENSSL \ + OT_CASH_USING_LUCRE + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = YES + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50% before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = YES + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = YES + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/cmake/Doxygen.extra.css.in b/cmake/Doxygen.extra.css.in new file mode 100644 index 00000000..022974fa --- /dev/null +++ b/cmake/Doxygen.extra.css.in @@ -0,0 +1,14 @@ +/* increase vertical space */ +#titlearea, #nav-path { + display: none; + height: 0px; +} + + +/* uncomment these lines for some extra vertical space */ + +/* +.tablist li { + line-height: 26px; +} +*/ diff --git a/cmake/FindBacktrace.cmake b/cmake/FindBacktrace.cmake new file mode 100644 index 00000000..8137125a --- /dev/null +++ b/cmake/FindBacktrace.cmake @@ -0,0 +1,98 @@ +# Distributed under the OSI-approved BSD 3-Clause License. See accompanying +# file Copyright.txt or https://cmake.org/licensing for details. + +#.rst: +# FindBacktrace +# ------------- +# +# Find provider for backtrace(3). +# +# Checks if OS supports backtrace(3) via either libc or custom library. +# This module defines the following variables: +# +# ``Backtrace_HEADER`` +# The header file needed for backtrace(3). Cached. +# Could be forcibly set by user. +# ``Backtrace_INCLUDE_DIRS`` +# The include directories needed to use backtrace(3) header. +# ``Backtrace_LIBRARIES`` +# The libraries (linker flags) needed to use backtrace(3), if any. +# ``Backtrace_FOUND`` +# Is set if and only if backtrace(3) support detected. +# +# The following cache variables are also available to set or use: +# +# ``Backtrace_LIBRARY`` +# The external library providing backtrace, if any. +# ``Backtrace_INCLUDE_DIR`` +# The directory holding the backtrace(3) header. +# +# Typical usage is to generate of header file using configure_file() with the +# contents like the following:: +# +# #cmakedefine01 Backtrace_FOUND +# #if Backtrace_FOUND +# # include <${Backtrace_HEADER}> +# #endif +# +# And then reference that generated header file in actual source. + +include(CMakePushCheckState) +include(CheckSymbolExists) +include(FindPackageHandleStandardArgs) + +# List of variables to be provided to find_package_handle_standard_args() +set(_Backtrace_STD_ARGS Backtrace_INCLUDE_DIR) + +if(Backtrace_HEADER) + set(_Backtrace_HEADER_TRY "${Backtrace_HEADER}") +else(Backtrace_HEADER) + set(_Backtrace_HEADER_TRY "execinfo.h") +endif(Backtrace_HEADER) + +find_path(Backtrace_INCLUDE_DIR "${_Backtrace_HEADER_TRY}") +set(Backtrace_INCLUDE_DIRS ${Backtrace_INCLUDE_DIR}) + +if (NOT DEFINED Backtrace_LIBRARY) + # First, check if we already have backtrace(), e.g., in libc + cmake_push_check_state(RESET) + set(CMAKE_REQUIRED_INCLUDES ${Backtrace_INCLUDE_DIRS}) + set(CMAKE_REQUIRED_QUIET ${Backtrace_FIND_QUIETLY}) + check_symbol_exists("backtrace" "${_Backtrace_HEADER_TRY}" _Backtrace_SYM_FOUND) + cmake_pop_check_state() +endif() + +if(_Backtrace_SYM_FOUND) + # Avoid repeating the message() call below each time CMake is run. + if(NOT Backtrace_FIND_QUIETLY AND NOT DEFINED Backtrace_LIBRARY) + message(STATUS "backtrace facility detected in default set of libraries") + endif() + set(Backtrace_LIBRARY "" CACHE FILEPATH "Library providing backtrace(3), empty for default set of libraries") +else() + # Check for external library, for non-glibc systems + if(Backtrace_INCLUDE_DIR) + # OpenBSD has libbacktrace renamed to libexecinfo + find_library(Backtrace_LIBRARY "execinfo") + elseif() # respect user wishes + set(_Backtrace_HEADER_TRY "backtrace.h") + find_path(Backtrace_INCLUDE_DIR ${_Backtrace_HEADER_TRY}) + find_library(Backtrace_LIBRARY "backtrace") + endif() + + # Prepend list with library path as it's more common practice + set(_Backtrace_STD_ARGS Backtrace_LIBRARY ${_Backtrace_STD_ARGS}) +endif() + +message(STATUS "Backtrace_LIBRARY: ${Backtrace_LIBRARY}") +if(Backtrace_LIBRARY STREQUAL "NOTFOUND") + set(Backtrace_LIBRARY "") +endif() +if(Backtrace_LIBRARY STREQUAL "Backtrace_LIBRARY-NOTFOUND") + set(Backtrace_LIBRARY "") +endif() + +set(Backtrace_LIBRARIES ${Backtrace_LIBRARY}) +set(Backtrace_HEADER "${_Backtrace_HEADER_TRY}" CACHE STRING "Header providing backtrace(3) facility") + +find_package_handle_standard_args(Backtrace FOUND_VAR Backtrace_FOUND REQUIRED_VARS ${_Backtrace_STD_ARGS}) +mark_as_advanced(Backtrace_HEADER Backtrace_INCLUDE_DIR Backtrace_LIBRARY) diff --git a/cmake/FindBerkeleyDB.cmake b/cmake/FindBerkeleyDB.cmake new file mode 100644 index 00000000..916d8f9c --- /dev/null +++ b/cmake/FindBerkeleyDB.cmake @@ -0,0 +1,25 @@ +# - Try to find Berkeley DB +# Once done this will define +# +# BERKELEY_DB_FOUND - system has Berkeley DB +# BERKELEY_DB_INCLUDE_DIR - the Berkeley DB include directory +# BERKELEY_DB_LIBRARIES - Link these to use Berkeley DB +# BERKELEY_DB_DEFINITIONS - Compiler switches required for using Berkeley DB + +# Copyright (c) 2006, Alexander Dymo, <adymo@kdevelop.org> +# +# Redistribution and use is allowed according to the terms of the BSD license. +# For details see the accompanying COPYING-CMAKE-SCRIPTS file. + +find_path(BERKELEY_DB_INCLUDE_DIR db_cxx.h + /usr/include/db4 + /usr/local/include/db4 +) + +find_library(BERKELEY_DB_LIBRARIES NAMES db_cxx ) + +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args(Berkeley "Could not find Berkeley DB >= 4.1" BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES) +# show the BERKELEY_DB_INCLUDE_DIR and BERKELEY_DB_LIBRARIES variables only in the advanced view +mark_as_advanced(BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES ) + diff --git a/cmake/FindHIDAPI.cmake b/cmake/FindHIDAPI.cmake new file mode 100644 index 00000000..9b45dcc4 --- /dev/null +++ b/cmake/FindHIDAPI.cmake @@ -0,0 +1,60 @@ +# - try to find HIDAPI library +# from http://www.signal11.us/oss/hidapi/ +# +# Cache Variables: (probably not for direct use in your scripts) +# HIDAPI_INCLUDE_DIR +# HIDAPI_LIBRARY +# +# Non-cache variables you might use in your CMakeLists.txt: +# HIDAPI_FOUND +# HIDAPI_INCLUDE_DIRS +# HIDAPI_LIBRARIES +# +# Requires these CMake modules: +# FindPackageHandleStandardArgs (known included with CMake >=2.6.2) +# +# Original Author: +# 2009-2010 Ryan Pavlik <rpavlik@iastate.edu> <abiryan@ryand.net> +# http://academic.cleardefinition.com +# Iowa State University HCI Graduate Program/VRAC +# +# Copyright Iowa State University 2009-2010. +# Distributed under the Boost Software License, Version 1.0. +# (See accompanying file LICENSE_1_0.txt or copy at +# http://www.boost.org/LICENSE_1_0.txt) + +find_library(HIDAPI_LIBRARY + NAMES hidapi hidapi-libusb) + +find_path(HIDAPI_INCLUDE_DIR + NAMES hidapi.h + PATH_SUFFIXES + hidapi) + +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args(HIDAPI + DEFAULT_MSG + HIDAPI_LIBRARY + HIDAPI_INCLUDE_DIR) + +if(HIDAPI_FOUND) + set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARY}") + if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux")) + find_library(LIBUSB-1.0_LIBRARY usb-1.0) + find_library(LIBUDEV_LIBRARY udev) + if(LIBUSB-1.0_LIBRARY) + set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUSB-1.0_LIBRARY}") + if(LIBUDEV_LIBRARY) + set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUDEV_LIBRARY}") + else() + message(WARNING "libudev library not found, binaries may fail to link.") + endif() + else() + message(WARNING "libusb-1.0 library not found, binaries may fail to link.") + endif() + endif() + + set(HIDAPI_INCLUDE_DIRS "${HIDAPI_INCLUDE_DIR}") +endif() + +mark_as_advanced(HIDAPI_INCLUDE_DIR HIDAPI_LIBRARY) diff --git a/cmake/FindLibUSB.cmake b/cmake/FindLibUSB.cmake new file mode 100644 index 00000000..c7e09d4c --- /dev/null +++ b/cmake/FindLibUSB.cmake @@ -0,0 +1,149 @@ +# - Find libusb for portable USB support +# This module will find libusb as published by +# http://libusb.sf.net and +# http://libusb-win32.sf.net +# +# It will use PkgConfig if present and supported, else search +# it on its own. If the LibUSB_ROOT_DIR environment variable +# is defined, it will be used as base path. +# The following standard variables get defined: +# LibUSB_FOUND: true if LibUSB was found +# LibUSB_HEADER_FILE: the location of the C header file +# LibUSB_INCLUDE_DIRS: the directory that contains the include file +# LibUSB_LIBRARIES: the library +# source: https://github.com/IntelRealSense/librealsense + +include ( CheckLibraryExists ) +include ( CheckIncludeFile ) + +find_package ( PkgConfig ) +if ( PKG_CONFIG_FOUND ) + pkg_check_modules ( PKGCONFIG_LIBUSB libusb-1.0 ) + if ( NOT PKGCONFIG_LIBUSB_FOUND ) + pkg_check_modules ( PKGCONFIG_LIBUSB libusb ) + endif ( NOT PKGCONFIG_LIBUSB_FOUND ) +endif ( PKG_CONFIG_FOUND ) + +if ( PKGCONFIG_LIBUSB_FOUND ) + set ( LibUSB_INCLUDE_DIRS ${PKGCONFIG_LIBUSB_INCLUDE_DIRS} ) + foreach ( i ${PKGCONFIG_LIBUSB_LIBRARIES} ) + string ( REGEX MATCH "[^-]*" ibase "${i}" ) + find_library ( ${ibase}_LIBRARY + NAMES ${i} + PATHS ${PKGCONFIG_LIBUSB_LIBRARY_DIRS} + ) + if ( ${ibase}_LIBRARY ) + list ( APPEND LibUSB_LIBRARIES ${${ibase}_LIBRARY} ) + endif ( ${ibase}_LIBRARY ) + mark_as_advanced ( ${ibase}_LIBRARY ) + endforeach ( i ) + +else ( PKGCONFIG_LIBUSB_FOUND ) + find_file ( LibUSB_HEADER_FILE + NAMES + libusb.h usb.h + PATHS + $ENV{ProgramFiles}/LibUSB-Win32 + $ENV{LibUSB_ROOT_DIR} + PATH_SUFFIXES + include + libusb-1.0 + include/libusb-1.0 + ) + mark_as_advanced ( LibUSB_HEADER_FILE ) + get_filename_component ( LibUSB_INCLUDE_DIRS "${LibUSB_HEADER_FILE}" PATH ) + + if ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" ) + # LibUSB-Win32 binary distribution contains several libs. + # Use the lib that got compiled with the same compiler. + if ( MSVC ) + if ( WIN32 ) + set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc ) + else ( WIN32 ) + set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc_x64 ) + endif ( WIN32 ) + elseif ( BORLAND ) + set ( LibUSB_LIBRARY_PATH_SUFFIX lib/bcc ) + elseif ( CMAKE_COMPILER_IS_GNUCC ) + set ( LibUSB_LIBRARY_PATH_SUFFIX lib/gcc ) + endif ( MSVC ) + endif ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" ) + + find_library ( usb_LIBRARY + NAMES + usb-1.0 libusb usb + PATHS + $ENV{ProgramFiles}/LibUSB-Win32 + $ENV{LibUSB_ROOT_DIR} + PATH_SUFFIXES + ${LibUSB_LIBRARY_PATH_SUFFIX} + ) + mark_as_advanced ( usb_LIBRARY ) + if ( usb_LIBRARY ) + set ( LibUSB_LIBRARIES ${usb_LIBRARY} ) + endif ( usb_LIBRARY ) + +endif ( PKGCONFIG_LIBUSB_FOUND ) + +if ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES ) + set ( LibUSB_FOUND true ) +endif ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES ) + +if ( LibUSB_FOUND ) + set ( CMAKE_REQUIRED_INCLUDES "${LibUSB_INCLUDE_DIRS}" ) + check_include_file ( "${LibUSB_HEADER_FILE}" LibUSB_FOUND ) +endif ( LibUSB_FOUND ) + +if ( LibUSB_FOUND ) + check_library_exists ( "${LibUSB_LIBRARIES}" usb_open "" LibUSB_FOUND ) + check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_device_list "" LibUSB_VERSION_1.0 ) + check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_port_numbers "" LibUSB_VERSION_1.0.16 ) + + if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux")) + find_library(LIBUDEV_LIBRARY udev) + if(LIBUDEV_LIBRARY) + set(LibUSB_LIBRARIES "${LibUSB_LIBRARIES};${LIBUDEV_LIBRARY}") + else() + message(WARNING "libudev library not found, binaries may fail to link.") + endif() + endif() + + # Library 1.0.16+ compilation test. + # The check_library_exists does not work well on Apple with shared libs. + if (APPLE OR LibUSB_VERSION_1.0.16 OR STATIC) + if (APPLE) + if(DEPENDS) + list(APPEND TEST_COMPILE_EXTRA_LIBRARIES "-framework Foundation -framework IOKit") + else() + find_library(COREFOUNDATION CoreFoundation) + find_library(IOKIT IOKit) + list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${IOKIT}) + list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${COREFOUNDATION}) + endif() + endif() + if (WIN32) + list(APPEND TEST_COMPILE_EXTRA_LIBRARIES setupapi) + endif() + list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LibUSB_LIBRARIES}) + + try_compile(LibUSB_COMPILE_TEST_PASSED + ${CMAKE_BINARY_DIR} + "${CMAKE_SOURCE_DIR}/cmake/test-libusb-version.c" + CMAKE_FLAGS + "-DINCLUDE_DIRECTORIES=${LibUSB_INCLUDE_DIRS}" + "-DLINK_DIRECTORIES=${LibUSB_LIBRARIES}" + LINK_LIBRARIES ${TEST_COMPILE_EXTRA_LIBRARIES} + OUTPUT_VARIABLE OUTPUT) + unset(TEST_COMPILE_EXTRA_LIBRARIES) + message(STATUS "LibUSB Compilation test: ${LibUSB_COMPILE_TEST_PASSED}") + endif() +endif ( LibUSB_FOUND ) + +if ( NOT LibUSB_FOUND ) + if ( NOT LibUSB_FIND_QUIETLY ) + message ( STATUS "LibUSB not found, try setting LibUSB_ROOT_DIR environment variable." ) + endif ( NOT LibUSB_FIND_QUIETLY ) + if ( LibUSB_FIND_REQUIRED ) + message ( FATAL_ERROR "" ) + endif ( LibUSB_FIND_REQUIRED ) +endif ( NOT LibUSB_FOUND ) diff --git a/cmake/FindLibunwind.cmake b/cmake/FindLibunwind.cmake new file mode 100644 index 00000000..af657cad --- /dev/null +++ b/cmake/FindLibunwind.cmake @@ -0,0 +1,41 @@ +# - Try to find libunwind +# Once done this will define +# +# LIBUNWIND_FOUND - system has libunwind +# LIBUNWIND_INCLUDE_DIR - the libunwind include directory +# LIBUNWIND_LIBRARIES - Link these to use libunwind +# LIBUNWIND_DEFINITIONS - Compiler switches required for using libunwind + +# Copyright (c) 2006, Alexander Dymo, <adymo@kdevelop.org> +# +# Redistribution and use is allowed according to the terms of the BSD license. +# For details see the accompanying COPYING-CMAKE-SCRIPTS file. + +find_path(LIBUNWIND_INCLUDE_DIR libunwind.h + /usr/include + /usr/local/include +) + +find_library(LIBUNWIND_LIBRARIES NAMES unwind ) +if(NOT LIBUNWIND_LIBRARIES STREQUAL "LIBUNWIND_LIBRARIES-NOTFOUND") + if (CMAKE_COMPILER_IS_GNUCC) + set(LIBUNWIND_LIBRARIES "gcc_eh;${LIBUNWIND_LIBRARIES}") + endif() +endif() + +# some versions of libunwind need liblzma, and we don't use pkg-config +# so we just look whether liblzma is installed, and add it if it is. +# It might not be actually needed, but doesn't hurt if it is not. +# We don't need any headers, just the lib, as it's privately needed. +message(STATUS "looking for liblzma") +find_library(LIBLZMA_LIBRARIES lzma ) +if(NOT LIBLZMA_LIBRARIES STREQUAL "LIBLZMA_LIBRARIES-NOTFOUND") + message(STATUS "liblzma found") + set(LIBUNWIND_LIBRARIES "${LIBUNWIND_LIBRARIES};${LIBLZMA_LIBRARIES}") +endif() + +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args(Libunwind "Could not find libunwind" LIBUNWIND_INCLUDE_DIR LIBUNWIND_LIBRARIES) +# show the LIBUNWIND_INCLUDE_DIR and LIBUNWIND_LIBRARIES variables only in the advanced view +mark_as_advanced(LIBUNWIND_INCLUDE_DIR LIBUNWIND_LIBRARIES ) + diff --git a/cmake/FindMiniupnpc.cmake b/cmake/FindMiniupnpc.cmake new file mode 100644 index 00000000..ad2004af --- /dev/null +++ b/cmake/FindMiniupnpc.cmake @@ -0,0 +1,59 @@ +# --------------------------------- FindMiniupnpc Start --------------------------------- +# Locate miniupnp library +# This module defines +# MINIUPNP_FOUND, if false, do not try to link to miniupnp +# MINIUPNP_LIBRARY, the miniupnp variant +# MINIUPNP_INCLUDE_DIR, where to find miniupnpc.h and family) +# MINIUPNPC_VERSION_1_7_OR_HIGHER, set if we detect the version of miniupnpc is 1.7 or higher +# +# Note that the expected include convention is +# #include "miniupnpc.h" +# and not +# #include <miniupnpc/miniupnpc.h> +# This is because, the miniupnpc location is not standardized and may exist +# in locations other than miniupnpc/ + +if (MINIUPNP_INCLUDE_DIR AND MINIUPNP_LIBRARY) + # Already in cache, be silent + set(MINIUPNP_FIND_QUIETLY TRUE) +endif () + +find_path(MINIUPNP_INCLUDE_DIR miniupnpc.h + HINTS $ENV{MINIUPNP_INCLUDE_DIR} + PATH_SUFFIXES miniupnpc +) + +find_library(MINIUPNP_LIBRARY miniupnpc + HINTS $ENV{MINIUPNP_LIBRARY} +) + +find_library(MINIUPNP_STATIC_LIBRARY libminiupnpc.a + HINTS $ENV{MINIUPNP_STATIC_LIBRARY} +) + +set(MINIUPNP_INCLUDE_DIRS ${MINIUPNP_INCLUDE_DIR}) +set(MINIUPNP_LIBRARIES ${MINIUPNP_LIBRARY}) +set(MINIUPNP_STATIC_LIBRARIES ${MINIUPNP_STATIC_LIBRARY}) + +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args( + MiniUPnPc DEFAULT_MSG + MINIUPNP_INCLUDE_DIR + MINIUPNP_LIBRARY +) + +IF(MINIUPNPC_FOUND) + file(STRINGS "${MINIUPNP_INCLUDE_DIR}/miniupnpc.h" MINIUPNPC_API_VERSION_STR REGEX "^#define[\t ]+MINIUPNPC_API_VERSION[\t ]+[0-9]+") + if(MINIUPNPC_API_VERSION_STR MATCHES "^#define[\t ]+MINIUPNPC_API_VERSION[\t ]+([0-9]+)") + set(MINIUPNPC_API_VERSION "${CMAKE_MATCH_1}") + if (${MINIUPNPC_API_VERSION} GREATER "10" OR ${MINIUPNPC_API_VERSION} EQUAL "10") + message(STATUS "Found miniupnpc API version " ${MINIUPNPC_API_VERSION}) + set(MINIUPNP_FOUND true) + set(MINIUPNPC_VERSION_1_7_OR_HIGHER true) + endif() + endif() + +ENDIF() + +mark_as_advanced(MINIUPNP_INCLUDE_DIR MINIUPNP_LIBRARY MINIUPNP_STATIC_LIBRARY) +# --------------------------------- FindMiniupnpc End --------------------------------- diff --git a/cmake/FindReadline.cmake b/cmake/FindReadline.cmake new file mode 100644 index 00000000..f26911b2 --- /dev/null +++ b/cmake/FindReadline.cmake @@ -0,0 +1,91 @@ +# - Try to find readline include dirs and libraries +# +# Usage of this module as follows: +# +# find_package(Readline) +# +# Variables used by this module, they can change the default behaviour and need +# to be set before calling find_package: +# +# Readline_ROOT_DIR Set this variable to the root installation of +# readline if the module has problems finding the +# proper installation path. +# +# Variables defined by this module: +# +# READLINE_FOUND System has readline, include and lib dirs found +# GNU_READLINE_FOUND Version of readline found is GNU readline, not libedit! +# LIBEDIT_FOUND Version of readline found is libedit, not GNU readline! +# Readline_INCLUDE_DIR The readline include directories. +# Readline_LIBRARY The readline library. +# GNU_READLINE_LIBRARY The GNU readline library or empty string. +# LIBEDIT_LIBRARY The libedit library or empty string. + +find_path(Readline_ROOT_DIR + NAMES include/readline/readline.h + PATHS /usr/local/opt/readline/ /opt/local/ /usr/local/ /usr/ + NO_DEFAULT_PATH +) + +find_path(Readline_INCLUDE_DIR + NAMES readline/readline.h + PATHS ${Readline_ROOT_DIR}/include + NO_DEFAULT_PATH +) + +find_library(Readline_LIBRARY + NAMES readline + PATHS ${Readline_ROOT_DIR}/lib + NO_DEFAULT_PATH +) + +find_library(Termcap_LIBRARY + NAMES tinfo termcap ncursesw ncurses cursesw curses +) + +if(Readline_INCLUDE_DIR AND Readline_LIBRARY) + set(READLINE_FOUND TRUE) +else(Readline_INCLUDE_DIR AND Readline_LIBRARY) + FIND_LIBRARY(Readline_LIBRARY NAMES readline PATHS Readline_ROOT_DIR) + include(FindPackageHandleStandardArgs) + FIND_PACKAGE_HANDLE_STANDARD_ARGS(Readline DEFAULT_MSG Readline_INCLUDE_DIR Readline_LIBRARY ) + MARK_AS_ADVANCED(Readline_INCLUDE_DIR Readline_LIBRARY) +endif(Readline_INCLUDE_DIR AND Readline_LIBRARY) + +mark_as_advanced( + Readline_ROOT_DIR + Readline_INCLUDE_DIR + Readline_LIBRARY +) + +set(CMAKE_REQUIRED_INCLUDES ${Readline_INCLUDE_DIR}) +set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY}) + +include(CheckFunctionExists) +check_function_exists(rl_copy_text HAVE_COPY_TEXT) +check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION) + +if(NOT HAVE_COMPLETION_FUNCTION) + if (Readline_LIBRARY) + set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY} ${Termcap_LIBRARY}) + endif(Readline_LIBRARY) + check_function_exists(rl_copy_text HAVE_COPY_TEXT_TC) + check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION_TC) + set(HAVE_COMPLETION_FUNCTION ${HAVE_COMPLETION_FUNCTION_TC}) + set(HAVE_COPY_TEXT ${HAVE_COPY_TEXT_TC}) + if(HAVE_COMPLETION_FUNCTION) + set(Readline_LIBRARY ${Readline_LIBRARY} ${Termcap_LIBRARY}) + endif(HAVE_COMPLETION_FUNCTION) +endif(NOT HAVE_COMPLETION_FUNCTION) + +set(LIBEDIT_LIBRARY "") +set(GNU_READLINE_LIBRARY "") + +if(HAVE_COMPLETION_FUNCTION AND HAVE_COPY_TEXT) + set(GNU_READLINE_FOUND TRUE) + set(GNU_READLINE_LIBRARY ${Readline_LIBRARY}) +elseif(READLINE_FOUND AND NOT HAVE_COPY_TEXT) + set(LIBEDIT_FOUND TRUE) + set(LIBEDIT_LIBRARY ${Readline_LIBRARY}) +endif(HAVE_COMPLETION_FUNCTION AND HAVE_COPY_TEXT) + diff --git a/cmake/FindUnbound.cmake b/cmake/FindUnbound.cmake new file mode 100644 index 00000000..e3eb3d67 --- /dev/null +++ b/cmake/FindUnbound.cmake @@ -0,0 +1,40 @@ +# Copyright (c) 2014-2019, The Monero Project +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +MESSAGE(STATUS "Looking for libunbound") + +FIND_PATH(UNBOUND_INCLUDE_DIR + NAMES unbound.h + PATH_SUFFIXES include/ include/unbound/ + PATHS "${PROJECT_SOURCE_DIR}" + ${UNBOUND_ROOT} + $ENV{UNBOUND_ROOT} + /usr/local/ + /usr/ +) + +find_library(UNBOUND_LIBRARIES unbound) diff --git a/cmake/FindZBar0.cmake b/cmake/FindZBar0.cmake new file mode 100644 index 00000000..efb10098 --- /dev/null +++ b/cmake/FindZBar0.cmake @@ -0,0 +1,22 @@ +# from http://code.google.com/p/low-cost-vision-2012/source/browse/CMakeModules/FindZBar0.cmake?name=2-helium-1&r=d61f248bd5565b3c086bf4769a04bfd98f7079df +# - Try to find ZBar +# This will define +# +# ZBAR_FOUND - +# ZBAR_LIBRARY_DIR - +# ZBAR_INCLUDE_DIR - +# ZBAR_LIBRARIES - +# + +find_package(PkgConfig) +pkg_check_modules(PC_ZBAR QUIET zbar) +set(ZBAR_DEFINITIONS ${PC_ZBAR_CFLAGS_OTHER}) +find_library(ZBAR_LIBRARIES NAMES zbar + HINTS ${PC_ZBAR_LIBDIR} ${PC_ZBAR_LIBRARY_DIRS} ) +find_path(ZBAR_INCLUDE_DIR Decoder.h + HINTS ${PC_ZBAR_INCLUDEDIR} ${PC_ZBAR_INCLUDE_DIRS} + PATH_SUFFIXES zbar ) +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args(ZBAR DEFAULT_MSG ZBAR_LIBRARIES ZBAR_INCLUDE_DIR) +message(STATUS "Found zbar libraries ${ZBAR_LIBRARIES}") + diff --git a/cmake/GenVersion.cmake b/cmake/GenVersion.cmake new file mode 100644 index 00000000..91c68da1 --- /dev/null +++ b/cmake/GenVersion.cmake @@ -0,0 +1,68 @@ +# Copyright (c) 2014-2019, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers + +# Check what commit we're on +execute_process(COMMAND "${GIT}" rev-parse --short=9 HEAD RESULT_VARIABLE RET OUTPUT_VARIABLE COMMIT OUTPUT_STRIP_TRAILING_WHITESPACE) + +if(RET) + # Something went wrong, set the version tag to -unknown + + message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.") + set(VERSIONTAG "unknown") + set(VERSION_IS_RELEASE "false") + configure_file("monero/src/version.cpp.in" "${TO}") +else() + string(SUBSTRING ${COMMIT} 0 9 COMMIT) + message(STATUS "You are currently on commit ${COMMIT}") + + # Get all the tags + execute_process(COMMAND "${GIT}" rev-list --tags --max-count=1 --abbrev-commit RESULT_VARIABLE RET OUTPUT_VARIABLE TAGGEDCOMMIT OUTPUT_STRIP_TRAILING_WHITESPACE) + + if(NOT TAGGEDCOMMIT) + message(WARNING "Cannot determine most recent tag. Make sure that you are building either from a Git working tree or from a source archive.") + set(VERSIONTAG "${COMMIT}") + set(VERSION_IS_RELEASE "false") + else() + message(STATUS "The most recent tag was at ${TAGGEDCOMMIT}") + + # Check if we're building that tagged commit or a different one + if(COMMIT STREQUAL TAGGEDCOMMIT) + message(STATUS "You are building a tagged release") + set(VERSIONTAG "release") + set(VERSION_IS_RELEASE "true") + else() + message(STATUS "You are ahead of or behind a tagged release") + set(VERSIONTAG "${COMMIT}") + set(VERSION_IS_RELEASE "false") + endif() + endif() + + configure_file("monero/src/version.cpp.in" "${TO}") +endif() diff --git a/cmake/GenVersionGui.cmake b/cmake/GenVersionGui.cmake new file mode 100644 index 00000000..0ec2e8ba --- /dev/null +++ b/cmake/GenVersionGui.cmake @@ -0,0 +1,64 @@ +# Copyright (c) 2014-2019, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers + +# Check what commit we're on +execute_process(COMMAND "${GIT}" rev-parse --short=9 HEAD RESULT_VARIABLE RET OUTPUT_VARIABLE COMMIT OUTPUT_STRIP_TRAILING_WHITESPACE) + +if(RET) + # Something went wrong, set the version tag to -unknown + + message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.") + set(VERSIONTAG "unknown") + configure_file("src/version.js.in" "${TO}") +else() + string(SUBSTRING ${COMMIT} 0 9 COMMIT) + message(STATUS "You are currently on commit ${COMMIT}") + + # Get all the tags + execute_process(COMMAND "${GIT}" rev-list --tags --max-count=1 --abbrev-commit RESULT_VARIABLE RET OUTPUT_VARIABLE TAGGEDCOMMIT OUTPUT_STRIP_TRAILING_WHITESPACE) + + if(NOT TAGGEDCOMMIT) + message(WARNING "Cannot determine most recent tag. Make sure that you are building either from a Git working tree or from a source archive.") + set(VERSIONTAG "${COMMIT}") + else() + message(STATUS "The most recent tag was at ${TAGGEDCOMMIT}") + + # Check if we're building that tagged commit or a different one + if(COMMIT STREQUAL TAGGEDCOMMIT) + message(STATUS "You are building a tagged release") + set(VERSIONTAG "release") + else() + message(STATUS "You are ahead of or behind a tagged release") + set(VERSIONTAG "${COMMIT}") + endif() + endif() + + configure_file("src/version.js.in" "${TO}") +endif() diff --git a/cmake/Version.cmake b/cmake/Version.cmake new file mode 100644 index 00000000..37c18fe4 --- /dev/null +++ b/cmake/Version.cmake @@ -0,0 +1,81 @@ +# Copyright (c) 2014-2017, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +function (write_static_version_header hash) + set(VERSIONTAG "${hash}") + configure_file("${CMAKE_SOURCE_DIR}/monero/src/version.cpp.in" "${CMAKE_BINARY_DIR}/version.cpp") +endfunction () + +find_package(Git QUIET) +if ("$Format:$" STREQUAL "") + # We're in a tarball; use hard-coded variables. + write_static_version_header("release") +elseif (GIT_FOUND OR Git_FOUND) + add_custom_command( + OUTPUT "${CMAKE_BINARY_DIR}/version.cpp" + COMMAND "${CMAKE_COMMAND}" + "-D" "GIT=${GIT_EXECUTABLE}" + "-D" "TO=${CMAKE_BINARY_DIR}/version.cpp" + "-P" "cmake/GenVersion.cmake" + WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}") + + #message(STATUS "Found Git: ${GIT_EXECUTABLE}") + # COMMAND "${CMAKE_COMMAND}" + # "-D" "GIT=${GIT_EXECUTABLE}" + # "-D" "TO=${CMAKE_BINARY_DIR}/monero/version.cpp" + # "-P" "cmake/GenVersion.cmake" + # BYPRODUCTS "${CMAKE_BINARY_DIR}/monero/version.cpp" + # WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}") +else() + message(STATUS "WARNING: Git was not found!") + write_static_version_header("unknown") +endif () +add_custom_target(genversion ALL + DEPENDS "${CMAKE_BINARY_DIR}/version.cpp") + + +#find_package(Git QUIET) +#if ("$Format:$" STREQUAL "") +# # We're in a tarball; use hard-coded variables. +# write_static_version_header("release") +#elseif (GIT_FOUND OR Git_FOUND) +# message(STATUS "Found Git: ${GIT_EXECUTABLE}") +# add_custom_command( +# OUTPUT "${CMAKE_BINARY_DIR}/version.cpp" +# COMMAND "${CMAKE_COMMAND}" +# "-D" "GIT=${GIT_EXECUTABLE}" +# "-D" "TO=${CMAKE_BINARY_DIR}/version.cpp" +# "-P" "cmake/GenVersion.cmake" +# WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}") +#else() +# message(STATUS "WARNING: Git was not found!") +# write_static_version_header("unknown") +#endif () +#add_custom_target(genversion ALL +# DEPENDS "${CMAKE_BINARY_DIR}/version.cpp") + diff --git a/cmake/VersionGui.cmake b/cmake/VersionGui.cmake new file mode 100644 index 00000000..b248cba0 --- /dev/null +++ b/cmake/VersionGui.cmake @@ -0,0 +1,52 @@ +# Copyright (c) 2014-2019, The Monero Project +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are +# permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this list of +# conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, this list +# of conditions and the following disclaimer in the documentation and/or other +# materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors may be +# used to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +function (write_static_version_header hash) + set(VERSIONTAG "${hash}") + configure_file("${CMAKE_SOURCE_DIR}/version.js.in" "${CMAKE_SOURCE_DIR}/version.js") +endfunction () + +find_package(Git QUIET) +if ("$Format:$" STREQUAL "") + # We're in a tarball; use hard-coded variables. + write_static_version_header("release") +elseif (GIT_FOUND OR Git_FOUND) + message(STATUS "Found Git: ${GIT_EXECUTABLE}") + add_custom_command( + OUTPUT "${CMAKE_SOURCE_DIR}/version.js" + COMMAND "${CMAKE_COMMAND}" + "-D" "GIT=${GIT_EXECUTABLE}" + "-D" "TO=${CMAKE_SOURCE_DIR}/version.js" + "-P" "cmake/GenVersionGui.cmake" + WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}") +else() + message(STATUS "WARNING: Git was not found!") + write_static_version_header("unknown") +endif () +add_custom_target(genversiongui ALL + DEPENDS "${CMAKE_SOURCE_DIR}/version.js") diff --git a/cmake/test-libusb-version.c b/cmake/test-libusb-version.c new file mode 100644 index 00000000..b80191b5 --- /dev/null +++ b/cmake/test-libusb-version.c @@ -0,0 +1,52 @@ +// Copyright (c) 2014-2019, The Monero Project +// +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without modification, are +// permitted provided that the following conditions are met: +// +// 1. Redistributions of source code must retain the above copyright notice, this list of +// conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright notice, this list +// of conditions and the following disclaimer in the documentation and/or other +// materials provided with the distribution. +// +// 3. Neither the name of the copyright holder nor the names of its contributors may be +// used to endorse or promote products derived from this software without specific +// prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +#include <libusb.h> + +#define UNUSED(expr) (void)(expr) + +int main(int argc, char *argv[]) { + libusb_device **devs; + libusb_context *ctx = NULL; + + int r = libusb_init(&ctx); UNUSED(r); + ssize_t cnt = libusb_get_device_list(ctx, &devs); UNUSED(cnt); + + struct libusb_device_descriptor desc; + r = libusb_get_device_descriptor(devs[0], &desc); UNUSED(r); + uint8_t bus_id = libusb_get_bus_number(devs[0]); UNUSED(bus_id); + uint8_t addr = libusb_get_device_address(devs[0]); UNUSED(addr); + + uint8_t tmp_path[16]; + r = libusb_get_port_numbers(devs[0], tmp_path, sizeof(tmp_path)); + UNUSED(r); + UNUSED(tmp_path); + + libusb_free_device_list(devs, 1); + libusb_exit(ctx); +} diff --git a/cmake/test-protobuf.cpp b/cmake/test-protobuf.cpp new file mode 100644 index 00000000..0a1ca82b --- /dev/null +++ b/cmake/test-protobuf.cpp @@ -0,0 +1,43 @@ +// Copyright (c) 2014-2019, The Monero Project +// +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without modification, are +// permitted provided that the following conditions are met: +// +// 1. Redistributions of source code must retain the above copyright notice, this list of +// conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright notice, this list +// of conditions and the following disclaimer in the documentation and/or other +// materials provided with the distribution. +// +// 3. Neither the name of the copyright holder nor the names of its contributors may be +// used to endorse or promote products derived from this software without specific +// prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +#include <string> +#include <iostream> +#include <google/protobuf/message.h> +#include <google/protobuf/unknown_field_set.h> +#include "test-protobuf.pb.h" + +int main(int argc, char *argv[]) { + google::protobuf::UnknownFieldSet ufs; + ufs.ClearAndFreeMemory(); + + Success sc; + sc.set_message("test"); + sc.SerializeToOstream(&std::cerr); + return 0; +} diff --git a/cmake/test-protobuf.proto b/cmake/test-protobuf.proto new file mode 100644 index 00000000..5300aea3 --- /dev/null +++ b/cmake/test-protobuf.proto @@ -0,0 +1,7 @@ +syntax = "proto2"; + +import "google/protobuf/descriptor.proto"; + +message Success { + optional string message = 1; +} diff --git a/cmake/test-static-assert.c b/cmake/test-static-assert.c new file mode 100644 index 00000000..2e6c8483 --- /dev/null +++ b/cmake/test-static-assert.c @@ -0,0 +1,34 @@ +// Copyright (c) 2014-2019, The Monero Project +// +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without modification, are +// permitted provided that the following conditions are met: +// +// 1. Redistributions of source code must retain the above copyright notice, this list of +// conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright notice, this list +// of conditions and the following disclaimer in the documentation and/or other +// materials provided with the distribution. +// +// 3. Neither the name of the copyright holder nor the names of its contributors may be +// used to endorse or promote products derived from this software without specific +// prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +#include <assert.h> + +static_assert(1, "FAIL"); +int main(int argc, char *argv[]) { + return 0; +} diff --git a/cmake/test-static-assert.cpp b/cmake/test-static-assert.cpp new file mode 100644 index 00000000..2e6c8483 --- /dev/null +++ b/cmake/test-static-assert.cpp @@ -0,0 +1,34 @@ +// Copyright (c) 2014-2019, The Monero Project +// +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without modification, are +// permitted provided that the following conditions are met: +// +// 1. Redistributions of source code must retain the above copyright notice, this list of +// conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright notice, this list +// of conditions and the following disclaimer in the documentation and/or other +// materials provided with the distribution. +// +// 3. Neither the name of the copyright holder nor the names of its contributors may be +// used to endorse or promote products derived from this software without specific +// prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY +// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL +// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +#include <assert.h> + +static_assert(1, "FAIL"); +int main(int argc, char *argv[]) { + return 0; +} diff --git a/components/CMakeLists.txt b/components/CMakeLists.txt new file mode 100644 index 00000000..2ae8e887 --- /dev/null +++ b/components/CMakeLists.txt @@ -0,0 +1,47 @@ +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +### + +#configure_file(${CMAKE_CURRENT_SOURCE_DIR}/defines.h.cmake +# ${CMAKE_CURRENT_BINARY_DIR}/defines.h) + +file(GLOB_RECURSE UI_FILES *.ui) +file(GLOB_RECURSE CODE_FILES *.cpp) + +qt5_wrap_ui(UI_HEADERS ${UI_FILES}) +#qt5_add_resources(RESOURCE_FILES ../resources/resources.qrc) + +# Windows application icon +if (WIN32) + set(WINDOWS_RES_FILE ${CMAKE_CURRENT_BINARY_DIR}/resources.obj) + if (MSVC) + add_custom_command(OUTPUT ${WINDOWS_RES_FILE} + COMMAND rc.exe /fo ${WINDOWS_RES_FILE} resources.rc + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}/win + ) + else() + add_custom_command(OUTPUT ${WINDOWS_RES_FILE} + COMMAND windres.exe resources.rc ${WINDOWS_RES_FILE} + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}/win + ) + endif() +endif() + +add_executable(${CMAKE_PROJECT_NAME} WIN32 + ${UI_HEADERS} + ${CODE_FILES} + ${RESOURCE_FILES} + ${WINDOWS_RES_FILE} +) +target_link_libraries(${CMAKE_PROJECT_NAME} + Qt5::Widgets +) + +if (UNIX) + install(TARGETS ${CMAKE_PROJECT_NAME} + RUNTIME DESTINATION bin) +elseif (WIN32) + install(TARGETS ${CMAKE_PROJECT_NAME} + DESTINATION .) +endif() diff --git a/fonts/CMakeLists.txt b/fonts/CMakeLists.txt new file mode 100644 index 00000000..68767a84 --- /dev/null +++ b/fonts/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.otf) diff --git a/images/CMakeLists.txt b/images/CMakeLists.txt new file mode 100644 index 00000000..e46654ff --- /dev/null +++ b/images/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.png) diff --git a/js/CMakeLists.txt b/js/CMakeLists.txt new file mode 100644 index 00000000..757d942b --- /dev/null +++ b/js/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.js) diff --git a/pages/CMakeLists.txt b/pages/CMakeLists.txt new file mode 100644 index 00000000..7f5c7e56 --- /dev/null +++ b/pages/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.qrc) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt new file mode 100644 index 00000000..9c66a15c --- /dev/null +++ b/src/CMakeLists.txt @@ -0,0 +1,159 @@ +add_subdirectory(QR-Code-generator) +add_subdirectory(QR-Code-scanner) +add_subdirectory(daemon) +add_subdirectory(libwalletqt) +add_subdirectory(model) +add_subdirectory(zxcvbn-c) + +qt5_add_resources(QML_QRC ../qml.qrc) + +# Compile source files (.h/.cpp) +file(GLOB SOURCE_FILES + "*.h" + "*.cpp" + "main/*.h" + "main/*.cpp" + "libwalletqt/WalletManager.cpp" + "libwalletqt/Wallet.cpp" + "libwalletqt/PendingTransaction.cpp" + "libwalletqt/TransactionHistory.cpp" + "libwalletqt/TransactionInfo.cpp" + "libwalletqt/QRCodeImageProvider.cpp" QR + "QR-Code-generator/BitBuffer.cpp" + "QR-Code-generator/QrCode.cpp" + "QR-Code-generator/QrSegment.cpp" + "libwalletqt/AddressBook.cpp" + "libwalletqt/Subaddress.cpp" + "libwalletqt/SubaddressAccount.cpp" + "libwalletqt/UnsignedTransaction.cpp" + "libwalletqt/WalletManager.h" + "libwalletqt/Wallet.h" + "libwalletqt/PendingTransaction.h" + "libwalletqt/TransactionHistory.h" + "libwalletqt/TransactionInfo.h" + "libwalletqt/QRCodeImageProvider.h" + "QR-Code-generator/BitBuffer.h" + "QR-Code-generator/QrCode.h" + "QR-Code-generator/QrSegment.h" + "libwalletqt/Transfer.h" + "libwalletqt/AddressBook.h" + "libwalletqt/Subaddress.h" + "libwalletqt/SubaddressAccount.h" + "libwalletqt/UnsignedTransaction.h" + "daemon/*.h" + "daemon/*.cpp" + "model/*.h" + "model/*.cpp" + "qt/*.h" + "qt/*.cpp" +) + +if(ENABLE_PASS_STRENGTH_METER) + file(GLOB PASS_STRENGTH_FILES + "zxcvbn-c/zxcvbn.h" + "zxcvbn-c/zxcvbn.c" + ) +endif() + +if(WITH_SCANNER) + file(GLOB QR_CODE_FILES + "QR-Code-generator/*.h" + "QR-Code-generator/*.cpp" + "QR-Code-scanner/*.h" + "QR-Code-scanner/*.cpp" + ) +endif() + +message(STATUS ${QML_QRC}) + +set(EXECUTABLE_FLAG) +if(MINGW) + set(EXECUTABLE_FLAG WIN32) +endif() + +add_executable(monero-gui ${EXECUTABLE_FLAG} main/main.cpp + ${SOURCE_FILES} + ${PASS_STRENGTH_FILES} + ${QR_CODE_FILES} + ${QML_QRC} +) +set_property(TARGET monero-gui PROPERTY RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin") + +# OpenGL +target_include_directories(monero-gui PUBLIC ${OPENGL_INCLUDE_DIR}) +message(STATUS "OpenGL: include dir at ${OPENGL_INCLUDE_DIR}") +message(STATUS "OpenGL: libraries at ${OPENGL_LIBRARIES}") + +target_include_directories(monero-gui PUBLIC ${Qt5Gui_PRIVATE_INCLUDE_DIRS}) + +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + +target_include_directories(monero-gui PUBLIC + ${CMAKE_SOURCE_DIR}/monero/include + ${CMAKE_SOURCE_DIR}/monero/src + ${CMAKE_CURRENT_SOURCE_DIR} + ${CMAKE_CURRENT_SOURCE_DIR}/daemon + ${CMAKE_CURRENT_SOURCE_DIR}/libwalletqt + ${CMAKE_CURRENT_SOURCE_DIR}/model + ${CMAKE_CURRENT_SOURCE_DIR}/QR-Code-generator + ${CMAKE_CURRENT_SOURCE_DIR}/QR-Code-scanner + ${CMAKE_CURRENT_SOURCE_DIR}/zxcvbn-c + ${LibUSB_INCLUDE_DIRS} + ${HIDAPI_INCLUDE_DIRS} + ${X11_INCLUDE_DIR} + ${Boost_INCLUDE_DIRS} + ${OPENSSL_INCLUDE_DIR} + ${ZBAR_INCLUDE_DIR} +) + +target_compile_definitions(monero-gui + PUBLIC + ${Qt5Widgets_DEFINITIONS} + ${Qt5Qml_DEFINITIONS} +) + +set(CMAKE_CXX_FLAGS "${Qt5Widgets_EXECUTABLE_COMPILE_FLAGS}") +set(CMAKE_CXX_FLAGS "-std=c++0x") + +if(X11_FOUND) + target_link_libraries(monero-gui ${X11_LIBRARIES} pthread dl Xt xcb X11) +endif() + +if(DEVICE_TREZOR_READY) + target_link_libraries(monero-gui ${TREZOR_DEP_LIBS}) +endif() + +target_link_libraries(monero-gui + ${CMAKE_BINARY_DIR}/lib/libwallet_merged.a + ${LMDB_LIBRARY} + ${CMAKE_BINARY_DIR}/monero/contrib/epee/src/libepee.a + ${CMAKE_BINARY_DIR}/monero/external/unbound/libunbound.a + ${SODIUM_LIBRARY} + ${CMAKE_BINARY_DIR}/monero/external/easylogging++/libeasylogging.a + ${CMAKE_BINARY_DIR}/monero/src/blockchain_db/libblockchain_db.a + ${CMAKE_BINARY_DIR}/monero/external/randomx/librandomx.a + ${CMAKE_BINARY_DIR}/monero/src/hardforks/libhardforks.a + ${Boost_LIBRARIES} + ${OPENSSL_LIBRARIES} + ${CMAKE_DL_LIBS} + ${LibUSB_LIBRARIES} + ${HIDAPI_LIBRARIES} + ${QT5_LIBRARIES} + ${EXTRA_LIBRARIES} + ${ICU_LIBRARIES} +) + +if(WITH_SCANNER) + target_link_libraries(monero-gui + ${ZBAR_LIBRARIES} + jpeg + v4l2 + v4lconvert + rt + ) +endif() + +install(TARGETS monero-gui + DESTINATION ${CMAKE_INSTALL_PREFIX} +) diff --git a/src/QR-Code-generator/CMakeLists.txt b/src/QR-Code-generator/CMakeLists.txt new file mode 100644 index 00000000..9ca31c61 --- /dev/null +++ b/src/QR-Code-generator/CMakeLists.txt @@ -0,0 +1,4 @@ +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + + diff --git a/src/QR-Code-scanner/CMakeLists.txt b/src/QR-Code-scanner/CMakeLists.txt new file mode 100644 index 00000000..9ca31c61 --- /dev/null +++ b/src/QR-Code-scanner/CMakeLists.txt @@ -0,0 +1,4 @@ +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + + diff --git a/TranslationManager.cpp b/src/TranslationManager.cpp index 377ed158..377ed158 100644 --- a/TranslationManager.cpp +++ b/src/TranslationManager.cpp diff --git a/TranslationManager.h b/src/TranslationManager.h index d1c155b5..d1c155b5 100644 --- a/TranslationManager.h +++ b/src/TranslationManager.h diff --git a/src/daemon/CMakeLists.txt b/src/daemon/CMakeLists.txt new file mode 100644 index 00000000..9ca31c61 --- /dev/null +++ b/src/daemon/CMakeLists.txt @@ -0,0 +1,4 @@ +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + + diff --git a/src/libwalletqt/CMakeLists.txt b/src/libwalletqt/CMakeLists.txt new file mode 100644 index 00000000..9ca31c61 --- /dev/null +++ b/src/libwalletqt/CMakeLists.txt @@ -0,0 +1,4 @@ +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + + diff --git a/Logger.cpp b/src/main/Logger.cpp index ad356bcb..0d15b4e3 100644 --- a/Logger.cpp +++ b/src/main/Logger.cpp @@ -34,7 +34,7 @@ #include <QDebug> #include "Logger.h" -#include "src/qt/TailsOS.h" +#include "qt/TailsOS.h" #include "wallet/api/wallet2_api.h" // default log path by OS (should be writable) diff --git a/Logger.h b/src/main/Logger.h index 7674a437..7674a437 100644 --- a/Logger.h +++ b/src/main/Logger.h diff --git a/MainApp.cpp b/src/main/MainApp.cpp index b1c418ce..b1c418ce 100644 --- a/MainApp.cpp +++ b/src/main/MainApp.cpp diff --git a/MainApp.h b/src/main/MainApp.h index ec8b7045..ec8b7045 100644 --- a/MainApp.h +++ b/src/main/MainApp.h diff --git a/clipboardAdapter.cpp b/src/main/clipboardAdapter.cpp index b558936a..b558936a 100644 --- a/clipboardAdapter.cpp +++ b/src/main/clipboardAdapter.cpp diff --git a/clipboardAdapter.h b/src/main/clipboardAdapter.h index 0ce168cf..0ce168cf 100644 --- a/clipboardAdapter.h +++ b/src/main/clipboardAdapter.h diff --git a/filter.cpp b/src/main/filter.cpp index 581d0750..581d0750 100644 --- a/filter.cpp +++ b/src/main/filter.cpp diff --git a/filter.h b/src/main/filter.h index 24b278ec..24b278ec 100644 --- a/filter.h +++ b/src/main/filter.h diff --git a/main.cpp b/src/main/main.cpp index b3a97260..3a9eb014 100644 --- a/main.cpp +++ b/src/main/main.cpp @@ -1,21 +1,21 @@ // Copyright (c) 2014-2018, The Monero Project -// +// // All rights reserved. -// +// // Redistribution and use in source and binary forms, with or without modification, are // permitted provided that the following conditions are met: -// +// // 1. Redistributions of source code must retain the above copyright notice, this list of // conditions and the following disclaimer. -// +// // 2. Redistributions in binary form must reproduce the above copyright notice, this list // of conditions and the following disclaimer in the documentation and/or other // materials provided with the distribution. -// +// // 3. Neither the name of the copyright holder nor the names of its contributors may be // used to endorse or promote products derived from this software without specific // prior written permission. -// +// // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY // EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF // MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL @@ -64,9 +64,9 @@ #include "MainApp.h" #include "qt/ipc.h" #include "qt/utils.h" -#include "src/qt/TailsOS.h" -#include "src/qt/KeysFiles.h" -#include "src/qt/MoneroSettings.h" +#include "qt/TailsOS.h" +#include "qt/KeysFiles.h" +#include "qt/MoneroSettings.h" #include "qt/prices.h" // IOS exclusions @@ -75,9 +75,57 @@ #endif #ifdef WITH_SCANNER -#include "QrCodeScanner.h" +#include "QR-Code-scanner/QrCodeScanner.h" #endif +#include <QtPlugin> +#if defined(Q_OS_OSX) + Q_IMPORT_PLUGIN(QCocoaIntegrationPlugin); +#elif defined(Q_OS_WIN) + Q_IMPORT_PLUGIN(QWindowsIntegrationPlugin); +#elif defined(Q_OS_LINUX) + Q_IMPORT_PLUGIN(QXcbIntegrationPlugin); +#endif +Q_IMPORT_PLUGIN(QSvgIconPlugin) +Q_IMPORT_PLUGIN(QGifPlugin) +Q_IMPORT_PLUGIN(QICNSPlugin) +Q_IMPORT_PLUGIN(QICOPlugin) +Q_IMPORT_PLUGIN(QJp2Plugin) +Q_IMPORT_PLUGIN(QJpegPlugin) +Q_IMPORT_PLUGIN(QMngPlugin) +Q_IMPORT_PLUGIN(QSvgPlugin) +Q_IMPORT_PLUGIN(QTgaPlugin) +Q_IMPORT_PLUGIN(QTiffPlugin) +Q_IMPORT_PLUGIN(QWbmpPlugin) +Q_IMPORT_PLUGIN(QWebpPlugin) +Q_IMPORT_PLUGIN(QQmlDebuggerServiceFactory) +Q_IMPORT_PLUGIN(QQmlInspectorServiceFactory) +Q_IMPORT_PLUGIN(QLocalClientConnectionFactory) +Q_IMPORT_PLUGIN(QDebugMessageServiceFactory) +Q_IMPORT_PLUGIN(QQmlNativeDebugConnectorFactory) +Q_IMPORT_PLUGIN(QQmlNativeDebugServiceFactory) +Q_IMPORT_PLUGIN(QQmlProfilerServiceFactory) +Q_IMPORT_PLUGIN(QQuickProfilerAdapterFactory) +Q_IMPORT_PLUGIN(QQmlDebugServerFactory) +Q_IMPORT_PLUGIN(QTcpServerConnectionFactory) +Q_IMPORT_PLUGIN(QGenericEnginePlugin) + +Q_IMPORT_PLUGIN(QtQuick2Plugin) +Q_IMPORT_PLUGIN(QtQuickLayoutsPlugin) +Q_IMPORT_PLUGIN(QtGraphicalEffectsPlugin) +Q_IMPORT_PLUGIN(QtGraphicalEffectsPrivatePlugin) +Q_IMPORT_PLUGIN(QtQuick2WindowPlugin) +Q_IMPORT_PLUGIN(QtQuickControls1Plugin) +Q_IMPORT_PLUGIN(QtQuick2DialogsPlugin) +Q_IMPORT_PLUGIN(QmlFolderListModelPlugin) +Q_IMPORT_PLUGIN(QmlSettingsPlugin) +Q_IMPORT_PLUGIN(QtQuick2DialogsPrivatePlugin) +Q_IMPORT_PLUGIN(QtQuick2PrivateWidgetsPlugin) +Q_IMPORT_PLUGIN(QtQuickControls2Plugin) +Q_IMPORT_PLUGIN(QtQuickTemplates2Plugin) +Q_IMPORT_PLUGIN(QmlXmlListModelPlugin) +Q_IMPORT_PLUGIN(QMultimediaDeclarativeModule) + bool isIOS = false; bool isAndroid = false; bool isWindows = false; diff --git a/oscursor.cpp b/src/main/oscursor.cpp index f5ee3c74..f5ee3c74 100644 --- a/oscursor.cpp +++ b/src/main/oscursor.cpp diff --git a/oscursor.h b/src/main/oscursor.h index cb84e6fb..cb84e6fb 100644 --- a/oscursor.h +++ b/src/main/oscursor.h diff --git a/oshelper.cpp b/src/main/oshelper.cpp index c1326c0f..c1326c0f 100644 --- a/oshelper.cpp +++ b/src/main/oshelper.cpp diff --git a/oshelper.h b/src/main/oshelper.h index 4d378a9d..4d378a9d 100644 --- a/oshelper.h +++ b/src/main/oshelper.h diff --git a/src/main/qml.qrc b/src/main/qml.qrc new file mode 100644 index 00000000..77179f88 --- /dev/null +++ b/src/main/qml.qrc @@ -0,0 +1,255 @@ +<RCC> + <qresource prefix="/"> + <file>main.qml</file> + <file>LeftPanel.qml</file> + <file>MiddlePanel.qml</file> + <file>images/download-white.png</file> + <file>images/download-white@2x.png</file> + <file>images/external-link-white.png</file> + <file>images/external-link-white@2x.png</file> + <file>images/minus-white.png</file> + <file>images/minus-white@2x.png</file> + <file>images/plus-white.png</file> + <file>images/plus-white@2x.png</file> + <file>components/Label.qml</file> + <file>images/whatIsIcon.png</file> + <file>images/whatIsIcon@2x.png</file> + <file>images/lockIcon.png</file> + <file>components/MenuButton.qml</file> + <file>pages/Account.qml</file> + <file>pages/Transfer.qml</file> + <file>pages/History.qml</file> + <file>pages/AddressBook.qml</file> + <file>pages/Mining.qml</file> + <file>components/NetworkStatusItem.qml</file> + <file>components/Input.qml</file> + <file>components/StandardButton.qml</file> + <file>components/LineEdit.qml</file> + <file>components/TipItem.qml</file> + <file>images/tip.png</file> + <file>components/Scroll.qml</file> + <file>components/MenuButtonDivider.qml</file> + <file>images/moneroIcon.png</file> + <file>components/StandardDropdown.qml</file> + <file>images/whiteDropIndicator.png</file> + <file>images/whiteDropIndicator@2x.png</file> + <file>components/CheckBox.qml</file> + <file>images/uncheckedIcon.png</file> + <file>images/uncheckedIcon@2x.png</file> + <file>components/DatePicker.qml</file> + <file>images/prevMonth.png</file> + <file>images/prevMonth@2x.png</file> + <file>components/TitleBar.qml</file> + <file>images/moneroLogo2.png</file> + <file>images/resize.png</file> + <file>images/resize@2x.png</file> + <file>images/resizeHovered.png</file> + <file>images/resizeHovered@2x.png</file> + <file>images/nextPage.png</file> + <file>images/nextPage@2x.png</file> + <file>lang/languages.xml</file> + <file>lang/flags/bd.png</file> + <file>lang/flags/bg.png</file> + <file>lang/flags/br.png</file> + <file>lang/flags/catalonia.png</file> + <file>lang/flags/cn.png</file> + <file>lang/flags/hr.png</file> + <file>lang/flags/hu.png</file> + <file>lang/flags/cz.png</file> + <file>lang/flags/dk.png</file> + <file>lang/flags/eg.png</file> + <file>lang/flags/esperanto.png</file> + <file>lang/flags/fi.png</file> + <file>lang/flags/fr.png</file> + <file>lang/flags/de.png</file> + <file>lang/flags/in.png</file> + <file>lang/flags/id.png</file> + <file>lang/flags/il.png</file> + <file>lang/flags/ir.png</file> + <file>lang/flags/irl.png</file> + <file>lang/flags/it.png</file> + <file>lang/flags/jp.png</file> + <file>lang/flags/ku.png</file> + <file>lang/flags/lt.png</file> + <file>lang/flags/nl.png</file> + <file>lang/flags/pk.png</file> + <file>lang/flags/ps.png</file> + <file>lang/flags/pl.png</file> + <file>lang/flags/pt.png</file> + <file>lang/flags/ro.png</file> + <file>lang/flags/ru.png</file> + <file>lang/flags/rs.png</file> + <file>lang/flags/sk.png</file> + <file>lang/flags/si.png</file> + <file>lang/flags/za.png</file> + <file>lang/flags/kr.png</file> + <file>lang/flags/es.png</file> + <file>lang/flags/se.png</file> + <file>lang/flags/tw.png</file> + <file>lang/flags/tr.png</file> + <file>lang/flags/ua.png</file> + <file>lang/flags/gb.png</file> + <file>lang/flags/us.png</file> + <file>lang/flags/pirate.png</file> + <file>pages/Receive.qml</file> + <file>pages/TxKey.qml</file> + <file>pages/SharedRingDB.qml</file> + <file>components/effects/ImageMask.qml</file> + <file>components/IconButton.qml</file> + <file>components/PasswordDialog.qml</file> + <file>components/InputDialog.qml</file> + <file>components/ProcessingSplash.qml</file> + <file>components/ProgressBar.qml</file> + <file>components/StandardDialog.qml</file> + <file>pages/Sign.qml</file> + <file>components/DaemonManagerDialog.qml</file> + <file>version.js</file> + <file>components/DaemonConsole.qml</file> + <file>components/QRCodeScanner.qml</file> + <file>components/Notifier.qml</file> + <file>components/TextBlock.qml</file> + <file>components/RemoteNodeEdit.qml</file> + <file>pages/Keys.qml</file> + <file>images/appicon.ico</file> + <file>images/card-background.png</file> + <file>images/card-background@2x.png</file> + <file>images/moneroLogo_white.png</file> + <file>images/question.png</file> + <file>images/question@2x.png</file> + <file>images/titlebarLogo.png</file> + <file>images/titlebarLogo@2x.png</file> + <file>pages/merchant/MerchantTitlebar.qml</file> + <file>images/menuButtonGradient.png</file> + <file>fonts/Roboto-Medium.ttf</file> + <file>fonts/Roboto-Regular.ttf</file> + <file>fonts/Roboto-Light.ttf</file> + <file>fonts/Roboto-Bold.ttf</file> + <file>fonts/RobotoMono-Medium.ttf</file> + <file>fonts/RobotoMono-Regular.ttf</file> + <file>fonts/RobotoMono-Light.ttf</file> + <file>fonts/RobotoMono-Bold.ttf</file> + <file>components/Style.qml</file> + <file>components/qmldir</file> + <file>components/InlineButton.qml</file> + <file>images/lightning.png</file> + <file>images/lightning@2x.png</file> + <file>images/logout.png</file> + <file>images/logout@2x.png</file> + <file>images/moneroIcon-28x28.png</file> + <file>images/moneroIcon-28x28@2x.png</file> + <file>images/lightning-white.png</file> + <file>images/lightning-white@2x.png</file> + <file>components/InputMulti.qml</file> + <file>components/LineEditMulti.qml</file> + <file>components/LabelButton.qml</file> + <file>components/LabelSubheader.qml</file> + <file>images/arrow-right-medium-white.png</file> + <file>images/arrow-right-medium-white@2x.png</file> + <file>images/rightArrow.png</file> + <file>images/rightArrow@2x.png</file> + <file>images/historyBorderRadius.png</file> + <file>components/CheckBox2.qml</file> + <file>components/TextPlain.qml</file> + <file>components/TextPlainArea.qml</file> + <file>js/TxUtils.js</file> + <file>images/warning.png</file> + <file>images/warning@2x.png</file> + <file>images/rightArrowInactive.png</file> + <file>images/rightArrowInactive@2x.png</file> + <file>js/Windows.js</file> + <file>js/Utils.js</file> + <file>components/RadioButton.qml</file> + <file>pages/settings/Settings.qml</file> + <file>pages/settings/SettingsWallet.qml</file> + <file>pages/settings/SettingsNode.qml</file> + <file>pages/settings/SettingsLog.qml</file> + <file>pages/settings/SettingsLayout.qml</file> + <file>pages/settings/SettingsInfo.qml</file> + <file>pages/settings/Navbar.qml</file> + <file>components/WarningBox.qml</file> + <file>images/miningxmr.png</file> + <file>images/miningxmr@2x.png</file> + <file>images/plus-in-circle-medium-white.png</file> + <file>images/plus-in-circle-medium-white@2x.png</file> + <file>pages/merchant/Merchant.qml</file> + <file>pages/merchant/MerchantCheckbox.qml</file> + <file>pages/merchant/MerchantTrackingList.qml</file> + <file>images/merchant/arrow_right.png</file> + <file>images/merchant/bg.png</file> + <file>images/merchant/input_box.png</file> + <file>fonts/FontAwesome/fa-brands-400.ttf</file> + <file>fonts/FontAwesome/fa-regular-400.ttf</file> + <file>fonts/FontAwesome/fa-solid-900.ttf</file> + <file>fonts/FontAwesome/FontAwesome.qml</file> + <file>fonts/FontAwesome/Object.qml</file> + <file>fonts/FontAwesome/qmldir</file> + <file>wizard/WizardAskPassword.qml</file> + <file>wizard/WizardController.qml</file> + <file>wizard/WizardCreateWallet1.qml</file> + <file>wizard/WizardCreateWallet2.qml</file> + <file>wizard/WizardCreateWallet3.qml</file> + <file>wizard/WizardCreateWallet4.qml</file> + <file>wizard/WizardCreateDevice1.qml</file> + <file>wizard/WizardDaemonSettings.qml</file> + <file>wizard/WizardHeader.qml</file> + <file>wizard/WizardHome.qml</file> + <file>wizard/WizardLanguage.qml</file> + <file>wizard/WizardLang.qml</file> + <file>wizard/WizardNav.qml</file> + <file>wizard/WizardWalletInput.qml</file> + <file>wizard/WizardRestoreWallet1.qml</file> + <file>wizard/WizardRestoreWallet2.qml</file> + <file>wizard/WizardRestoreWallet3.qml</file> + <file>wizard/WizardRestoreWallet4.qml</file> + <file>wizard/WizardSummary.qml</file> + <file>wizard/WizardSummaryItem.qml</file> + <file>wizard/WizardModeSelection.qml</file> + <file>wizard/WizardModeRemoteNodeWarning.qml</file> + <file>wizard/WizardModeBootstrap.qml</file> + <file>wizard/WizardMenuItem.qml</file> + <file>js/Wizard.js</file> + <file>components/LanguageSidebar.qml</file> + <file>images/world-flags-globe.png</file> + <file>images/langFlagGrey.png</file> + <file>images/restore-wallet-from-hardware@2x.png</file> + <file>images/restore-wallet-from-hardware.png</file> + <file>images/open-wallet-from-file@2x.png</file> + <file>images/open-wallet-from-file.png</file> + <file>images/restore-wallet@2x.png</file> + <file>images/restore-wallet.png</file> + <file>images/create-wallet@2x.png</file> + <file>images/create-wallet.png</file> + <file>images/remote-node.png</file> + <file>images/remote-node@2x.png</file> + <file>images/local-node.png</file> + <file>images/local-node@2x.png</file> + <file>images/local-node-full.png</file> + <file>images/local-node-full@2x.png</file> + <file>wizard/WizardNavProgressDot.qml</file> + <file>wizard/WizardOpenWallet1.qml</file> + <file>images/arrow-right-in-circle.png</file> + <file>images/arrow-right-in-circle@2x.png</file> + <file>images/themes/white/leftPanelBg.jpg</file> + <file>images/themes/white/middlePanelBg.jpg</file> + <file>images/right.svg</file> + <file>images/middlePanelShadow.png</file> + <file>images/themes/white/titlebarLogo@2x.png</file> + <file>images/themes/white/titlebarLogo.png</file> + <file>images/sidebar.svg</file> + <file>images/fullscreen.svg</file> + <file>images/close.svg</file> + <file>images/minimize.svg</file> + <file>images/themes/white/close.svg</file> + <file>images/themes/white/fullscreen.svg</file> + <file>images/themes/white/minimize.svg</file> + <file>images/themes/white/question.svg</file> + <file>images/themes/white/expand.svg</file> + <file>components/effects/ColorTransition.qml</file> + <file>components/effects/GradientBackground.qml</file> + <file>images/check-white.svg</file> + <file>images/copy.svg</file> + <file>images/edit.svg</file> + <file>images/arrow-right-in-circle-outline-medium-white.svg</file> + <file>images/tails-grey.png</file> + </qresource> +</RCC> diff --git a/src/model/CMakeLists.txt b/src/model/CMakeLists.txt new file mode 100644 index 00000000..9ca31c61 --- /dev/null +++ b/src/model/CMakeLists.txt @@ -0,0 +1,4 @@ +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + + diff --git a/src/version.js.in b/src/version.js.in new file mode 100644 index 00000000..cbce82db --- /dev/null +++ b/src/version.js.in @@ -0,0 +1,3 @@ +var GUI_VERSION = "@VERSIONTAG@" +var GUI_MONERO_VERSION = "@VERSIONTAG@" + diff --git a/src/zxcvbn-c/CMakeLists.txt b/src/zxcvbn-c/CMakeLists.txt new file mode 100644 index 00000000..9ca31c61 --- /dev/null +++ b/src/zxcvbn-c/CMakeLists.txt @@ -0,0 +1,4 @@ +file(GLOB_RECURSE SRC_SOURCES *.cpp) +file(GLOB_RECURSE SRC_HEADERS *.h) + + diff --git a/tabs/CMakeLists.txt b/tabs/CMakeLists.txt new file mode 100644 index 00000000..7f5c7e56 --- /dev/null +++ b/tabs/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.qrc) diff --git a/translations/CMakeLists.txt b/translations/CMakeLists.txt new file mode 100644 index 00000000..fe193ca1 --- /dev/null +++ b/translations/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.ts) diff --git a/wizard/CMakeLists.txt b/wizard/CMakeLists.txt new file mode 100644 index 00000000..7f5c7e56 --- /dev/null +++ b/wizard/CMakeLists.txt @@ -0,0 +1 @@ +qt5_add_resources(RESOURCE_FILES *.qrc) |